|
 |
Q-CON are licenced manufacturers of Hebel,Geramany International Know as AAC. |
 |
|
| |
|
|
Q-CON are licenced manufactures of Hebel Autoclaved Aerated Concrete internationally knows as AAC. Production of this high quality product commenced in february 1996.
Q-CON has sussessfully been used in Europe since early this century and is now among the most-used wall building materials in Erope with a rapid growth in market shares in mary countries, especially in Asia.
Q-CON (AAC : Autoclaved Aerated Concrete) is manufactured from Sand, Lime, and Cement. the product is added to produce hydrogen which causes the concrete to become aerated. The product is then steam cured in an autoclave. |
|
The chemical setting reaction of AAC is the same as the setting process of cement. In its chemical properties, Aac has similar durability characteristics to nornal concrete. The chemical setting reaction of AAC is the same as the setting process of cement. In its chemical properties, Aac has similar durability characteristics to nornal concrete. |
 |
 |
|
Q-CON block is 200 mm hight and 600 mm long, the thickness may vary between 75 mm and 375 mm in 25 mm increments. Avariety of Walling System is possible , however the standard Q-CON buildings has 200 mm thick external walls and 100 or 125 internal non load bearing walls. |
|
Thickness (cm) |
Size (cm) |
Pcs (cm) |
Kg/sq.m |
Pcs/Pallet |
7.5 |
20x60 |
8.33 |
46.5 |
200 |
10 |
20x60 |
8.33 |
62 |
150 |
12.5 |
20x60 |
8.33 |
77.5 |
125 |
15 |
20x60 |
8.33 |
93 |
100 |
20 |
20x60 |
8.33 |
124 |
70 |
25 |
20x60 |
8.33 |
155 |
60 |
|
 |
 |
|
Q-CON lintels are reinforced sections similar to panels, the lintels are used as supports over doorways, windows and other openings. Lingtels are avialable in standard block widths of 100, 125, 150 and 200 mm and lengths up to 3,600 mm. Minimum bearing lengths for each end of Lintel and allowable working loads redommend by Q-CON |
|
Thickness
(cm) |
Width
(cm) |
Length
(every thickness,m) |
Min.Bearing Length
(cm) |
10,12.5 |
20 |
1.20 |
15 |
15,20 |
|
1.50,1.80,2.10,2.40 |
20 |
25 |
|
2.70,3.00,3.30,3.60 |
30 |
|
 |
Q-CON Panels are reinforced with corrosion-protected, fully welded reinfocing cage. Floor Panel allow for long term deflection of span/250. The maximum spans and moments for Q-CON Panels are given in the tables using working loads that recommanded by Q-CON. Q-CON Panels are supplied ready for use. Installtion is therefore largely dry and generally on fromwork or bfracing is necessry.
 |
|
Thickness
(cm) |
Length
(cm) |
Max Wid Load
(kg/sq.m) |
7.5 |
 3.50 |
200 |
10 |
4.50 |
400 |
12.5 |
5.00 |
500 |
15 |
5.50 |
500 |
17.5 |
6.00 |
500 |
20 |
6.00 |
500 |
22.5 |
6.00 |
500 |
25 |
6.00 |
500 |
27.5 |
|
|
30 |
|
|
|
|
| |
Thickness
(cm) |
Length
(cm) |
Safe Load
(kg/sq.m) |
7.5 |
1.50-2.00 |
150-400 |
10 |
2.00-3.00 |
150-500 |
12.5 |
2.00-4.00 |
150-800 |
15 |
2.00-4.50 |
150-1,200 |
17.5 |
2.00-5.50 |
150-1,800 |
20 |
2.00-6.00 |
230-2,400 |
22.5 |
6.00 |
 230 |
25 |
6.00 |
320 |
27.5 |
6.00 |
430 |
30 |
6.00 |
550 |
|
|
|
|
 |
 |
|
Q-CON AAC Thin Bed Mortar is applied using a toothed trowel to the entire area of the horizontal and vertical face of the blocks. No other additive, powder or liqhuid should be added to Q-CON Thin Bed Mortar. The mortar thickness should be in range at 2-3 mm. |
|
| |
Q-CON AAC Rendering Mortar is special mortar for render AAC Blocks or Panels which can used for internal and external. No other additive, powder or liquid should be added to Q-CON Rendering Mortar. Water muist be clean, cold and drinkable. The recommanded thickness is 5-10 mm which will cover approxiately 4.0 sq.m /40 kg bag.
Q-CON wall or partition wall alone have a large potential where partition wall can easily be ereted into a building with existing wall constructed of assorted materials still taking full advantage of high fire rating, good sound absorption, and fast installtion with little mess. Easily competing with walls of plywood or plasterboard. Internal walls have a ratio of 2/3 against External walls of 1/3. |
|
|
 Laying laid using thin-bed glue mortar, plastered or unplastered for decoration.
Note laying in 1-2 mm thin-bed glue mortar results in a dramatiction of bedding mortar and a reduction of on-site handling and mixing. (ie minimizing wet trades)
Cutting Blocks can easily and accurately be cut with a tungsten toothed habdsaw. To achieve a constantly at site accurate cut a square is used to aid cutting. On Large sites an electric handsaw is commended. Q-CON can be easy adapted to suit all forms of construction, such as residential houses, commercial, industrial and agricultural building, school and hospital etc. and in all climatic conditions. To be used for all wall, external and internal, loadbearing or nonloadbearing, infill walls to framed structures, party walls, and fire rated walls.It is installed with thin-bed glue mortar, plasgtered or unplanstered depending on the type of fonish required. |
 |
 |
|
 Trowel |
| Square |
| Mallet |
| Levelling Plane |
| Stirrer |
| Hand Saw |
| Hand Router |
|
|
| |
|
| |
|
| Copyright © 2004 by PHUKET VALLEY. All Rights Reserved |
|
|
